BigHead Actuator, BigHead Wastegate Actuator Assembly, for 1999 Ford F250/F350 7.3L Power Stroke
BigHead Actuator BigHead Wastegate Actuator Assembly for 1999 Ford F250/F350 7.3L Power Stroke
Under high-boost conditions, the stock actuator's weak spring allows the wastegate to blow open, limiting midrange torque. Bleed orifices (also known as "boost foolers") just make it worse. Only Banks solves this problem by replacing the boost actuator. BigHead holds the wastegate closed for quicker boost, then controls the opening to maintain peak boost for superior acceleration and mid-range pulling power.
Power Now! When turbo exhaust backpressure increases, the stock actuator prematurely blows off the seat, softening boost in the midrange and killing torque. With twice the diaphragm area and spring pressure of the stock wastegate, Banks BigHead Wastegate Actuator keeps the valve seated longer and achieves a higher peak boost, sooner. At peak, BigHead opens the wastegate and holds its position, for precise boost control that gives you crisp acceleration and more mid-range pulling power. For trucks manufactured in 1998. Build date can be found on vehicle information tag driver door jamb.
BigHead Wastegate Actuator Assembly for use with 1999 - Early 1999.5 Ford 7.3L
- Quick, Controlled Boost
- Produces massive torque right from idle
- Doubles stock's diaphragm area and spring pressure
- Keeps the valve seated longer achieving higher peak boost, sooner
- Crisp acceleration and more mid-range pulling power
- Fits Ford 7.3L (1999-1999.5) manufactured in 1998
How a Turbo Wastegate Works:Let’s begin by describing what a turbo wastegate is. A wastegate is essentially a device that bypasses some exhaust flow around the turbine section of a turbocharger to control maximum boost. A wastegate is usually controlled...<read more>
- Item Requires Shipping
- 4.0 lbs.
- W5.0000” x H10.0000” x L12.0000”
- Free Shipping!