Home - Return to Previous Page
Additional Images

Racing Exhaust Manifold, Race Ported 1.77" x 1.58" Inlet, Ported 2.12" Outlet for 2001-2016 LBZ-LML 6.6L Duramax

Racing Exhaust ManifoldRace Ported 1.77" x 1.58" Inlet, Ported 2.12" Outletfor 2001-2016 LBZ-LML 6.6L Duramax

51007

Pure Race Capability

Part of the Banks Racing line. The best purpose-built cast exhaust manifolds created for racing the Duramax engine. Provides tremendous flow and uniform air distribution.

For Race Applications only, custom modifications required. Hardware not included.
NOTE: This product has the following shipping restriction(s):
  • This product cannot ship to California.
Was: $772.22
Sale: $695.00
Save: 10%
Save: $77.22
Qty:
NOTE: This product has the following shipping restriction(s):
  • This product cannot ship to California.

Description

If you are a racer and have a LBZ-LML 6.6L Duramax, Gale Banks Engineering offers The best cast Duramax manifold ever. Lay the power down with Banks Big Hoss Duramax Exhaust Manifolds!

For high performance, getting the exhaust gasses out of an engine is just as important as getting air into it. These race ready, high-flow manifolds were designed by Banks for the ultimate in fit and performance.

For use at sanctioned race events only

  • Designed and perfected in computer simulations for maximum drive pressure
  • CNC ported to fit aftermarket big port heads
  • 1.77" x 1.58" Race Ported Inlet Ports
  • 2.125" Race Ported Outlet Port
  • Outlet Flanges sized for 2.25" .06 wall tubing
  • Outlet Bolts M10x1.5 (not included)
  • Banks' Precision Port Alignment System allows the manifold to expand & contract without shrouding ports
  • Can be mounted stock position or reversed towards the front
  • Proprietary bolt pattern on outlets for ease of bolt installation, includes gaskets
  • High silicon moly for extreme temps
  • We recommend using ARP 762-1008 SS Hex M10x1.5 fasteners to the head (not included)

Emissions Compliant: Race Only


Duramax Exhaust Manifolds Comparison

A) Port size 39mm wide x 35mm high, Area = 1,320mm2

B) Inadequate cross section for high output

C) Poor entry conditions, No port runner blend to main runner

D) Exhaust runner choke point

E) Exhaust port choke point

F) Outlet size diameter = 45mm, Area = 1,590mm2

E) Special high-temp material

Comments: Okay for lower power.

  • Poor flow dynamics
  • Unequal cylinder to cylinder back pressures
  • Inlet & outlet undersized
  • Up pipes are small & restrictive

A) Port size 37mm wide x 36mm high, Area = 1,295mm2

B) Inadequate cross section for high output

C) Inadequate cross section

D) Inadequate cross section

E) Reverse flow

F) Outlet size diameter = 46mm, Area = 1,161mm2

Comments: Flawed & obsolete design

  • Port size smaller than stock and not sufficient for high performance
  • Rear port causes excessive turbulence
  • Outlet smaller than stock
  • Will not fit currently ported heads
  • Up pipes restrictive & mild steel in bends

A) Port size 44mm wide x 35mm high, Area = 1,512mm2

B) Choke point, 19% smaller than port inlet

C) Restriction/choke point

D) Choke point

E) Choke point

F) Choked port 16% smaller than inlet port

G) Outlet size diameter = 48mm, Area = 1,832mm2

E) Special high-temp material

Comments: Very crude & obsolete

  • Choke points cause inconsistent flow velocity reducing flow potential
  • Ports not high enough or wide enough for current ported heads
  • Up pipes restrictive and mild steel will fail quickly in any performance situation

A) Port size 45mm wide x 40mm high, Area = 1,745mm2 (Largest in industry)

B) Increasing streamlined cross-section

C) Consistent flow dynamics to port

D) Outlet size diameter = 54mm, Area = 2,290mm2 (Largest in industry)

E) Special high-temp material

Comments: The best cast Duramax manifold ever.

  • Exceptional constant flow velocity
  • Ports fit the largest CNC race heads
  • Equal port to port pressure balance
  • Computational Flow Dynamics, CFD, confirmed design
  • Supplied with Banks/Cometic big port gaskets
  • Outlet area matched T6 flange area
  • Consistent flow & turbine inlet velocity all the way to the turbo
  • Special proprietary high-temp/high-strength alloy
  • Stainless mandrel-bent up pipes w/super duty belllows

Videos

Details

Shipping Information

  • Item Requires Shipping