Monster Exhaust System, 4-inch Single Exit, Chrome Tip for 1999 Ford F250/F350 7.3L Power Stroke, with Catalytic Converter
Monster® Exhaust System4-inch Single Exit, Chrome Tipfor 1999 Ford F250/F350 7.3L Power Stroke, with Catalytic Converter
Cuts back pressure 81% for more power/lower EGTs
4-inch constant-diameter pipes with Straight-thru muffler. Retains stock catalytic converter. Cuts back pressure up to 81 Percent. 5-inch Chrome Tip
Extension Kit required for ECSB, CCSB, CCLB. See description.
F-250 and F-350 Pickups and Excursions: Banks 4 inch Monster turbo-back stainless steel exhaust features streamlined turbine-outlet pipe, intermediate pipe and tailpipe all formed of stainless, heavy-wall tubing with constant-diameter bends to maximize flow, lower exhaust gas temps and slash backpressure up to 81 percent. (Available with or without a cast, large-bore Power Elbow housing). Designed to retain stock catalytic converter. The polished-stainless Monster muffler features a straight-through 4 inch diameter flow-path with a Banks-designed expansion chamber to dissipate the annoying mid-range exhaust drone that affects most straight-through designs. The muffler utilizes spun ceramic, very-high-temperature packing, more than doubles stock exhaust flow, and delivers an authoritative - but never intrusive - exhaust sound. And the 5 inch polished rolled-edge tip has an adjustable clamp for positioning on tailpipe. Get it in your choice of chrome-over stainless or high temp black! See this system with the Black tip and no Power Elbow. (And to help keep it looking good, there's a 1/2 inch air gap to keep heat from tarnishing the finish). Important: Some vehicle configurations require an extension kit for proper fit. Pickups other than standard-cab long-bed or extended-cab short-bed require Exhaust Extension Kit. Extended Cab Long Bed P/N 53517 required, Crew Cab Short Bed P/N 53516 required, Crew Cab Long Bed P/N 53518 required.
Monster Exhaust System, Single Exit, Chrome Round Tip for use with 1999 Ford 7.3L, Truck, Catalytic Converter
- 4 inch mandrel bent Stainless Steel construction
- Retains stock catalytic converter
- Cuts backpressure up to 81%
- Dramatically improves flow
- Lowers exhaust gas temps
- Straight-thru muffler
- Turbo Back System
- 5 inch CHROME tip
- Maximum Airflow
Emissions Compliant: 49 State_CA_PND
Here's the TEST REPORT for your vehicle!
View it right now online »
- Banks Power
- Item Requires Shipping
- 73.0 lbs.
- W24.0000” x H11.0000” x L43.5000”