Monster Exhaust System, 4-inch Single Exit, Chrome Tip, for 2001-2003 Ford F250/F350 7.3L Power Stroke, Manual Transmission with Catalytic Converter
Monster Exhaust System 4-inch Single Exit, Chrome Tip for 2001-2003 Ford F250/F350 7.3L Power Stroke, Manual Transmission with Catalytic Converter
4-inch constant-diameter pipes and Straight-thru muffler cuts back pressure up to 81 Percent. Retains stock catalytic converter. 5-inch Cerakote Black Tip.
F-250 and F-350 Pickups and Excursions: Banks 4 inch Monster turbo-back stainless steel exhaust features streamlined turbine-outlet pipe, intermediate pipe and tailpipe all formed of stainless, heavy-wall tubing with constant-diameter bends to maximize flow, lower exhaust gas temps and slash backpressure up to 81 percent. (Available with or without a cast, large-bore Power Elbow housing). Designed to retain stock catalytic converter. The polished-stainless Monster muffler features a straight-through 4 inch diameter flow-path with a Banks-designed expansion chamber to dissipate the annoying mid-range exhaust drone that affects most straight-through designs. The muffler utilizes spun ceramic, very-high-temperature packing, more than doubles stock exhaust flow, and delivers an authoritative - but never intrusive - exhaust sound. And the 5 inch polished rolled-edge tip has an adjustable clamp for positioning on tailpipe. Get it in your choice of chrome-over stainless or high temp black! See this system with the Black tip and no Power Elbow. (And to help keep it looking good, there's a 1/2 inch air gap to keep heat from tarnishing the finish). Important: Some vehicle configurations require an extension kit for proper fit. Pickups other than standard-cab long-bed or extended-cab short-bed require Exhaust Extension Kit. Extended Cab Long Bed P/N 53517 required, Crew Cab Short Bed P/N 53516 required, Crew Cab Long Bed P/N 53518 required.
Monster Exhaust System, Single Exit, Chrome Round Tip for use with 2001-2003 Ford 7.3L-275hp, Manual Transmission, with Catalytic Converter
- Mandrel bent Stainless Steel construction
- Virtually eliminates backpressure
- Lowers exhaust gas temps
- Dramatically improves flow
- Maximum Airflow
- 4 inch constant-diameter pipes
- Straight-thru muffler
- Cuts backpressure up to 81%
- Retains stock catalytic converter
- 5 inch CHROME tip
Emissions Compliant: E.O. Not Required
- Item Requires Shipping
- 88.0 lbs.
- W15.0000” x H22.0000” x L43.5000”