Home - Return to Previous Page
Additional Images

Exhaust Header System, TorqueTubes Exhaust Headers and Y-pipe with hardware, for 1996-1997 Ford F250/F350 7.5L, 460 Truck, California Emissions, Manual Transmission

Exhaust Header System TorqueTubes Exhaust Headers and Y-pipe with hardware for 1996-1997 Ford F250/F350 7.5L, 460 Truck, California Emissions, Manual Transmission

48841
Pulls exhaust and slashes backpressure
Virtually indestructible 100% Stainless Steel. Mandrel-formed tubes tune exhaust flow for maximum torque. Maximize exhaust extraction. Flanges welded on both sides, then milled flat. Seamless high-velocity collector. Includes two full manifolds. 5/8 inch thick flanges won't warp or flex. No sealant/gaskets needed. Includes stainless Y-pipe. No need for factory heat shields. Runs cooler to protect expensive plug wires.
US Patent #6,634,171 B1
Emissions Compliant: D-161-45
Non-Air Injection 3-bolt catalytic converter flange inlet. Manual transmission. F-350 4x4 requires sway bar bracket #48899
Was: $1,298.89
Sale: $1,169.00
Save: 10%
Save: $129.89
Qty:

Description

Virtually indestructible 100 percent stainless TorqueTubes maximize exhaust extraction, unleashing gobs of torque that'll jam you into the seat and haul you up the grade. Banks heavy-wall 400-series stainless TorqueTubes include two full exhaust manifold assemblies, each with a seamless high-velocity collector. Unlike the restrictive stock setup, Banks TorqueTubes literally pull out the exhaust, unleashing greater torque and helping the intake stroke to draw in more air. Includes all required hardware. 5-Year Limited Warranty

Torque Tube Exhaust Header System for use with 1996-1997 Ford 460 Truck, California Emissions, Manual Transmission

  • Virtually indestructible 100% Stainless Steel
  • Mandrel-formed tubes tune exhaust flow for maximum torque
  • Maximize exhaust extraction
  • Flanges welded on both sides, then milled flat
  • Seamless high-velocity collector
  • Pulls exhaust and slashes backpressure
  • Includes two full manifolds
  • 5/8 inch thick flanges won't warp or flex
  • No sealant/gaskets needed
  • Includes stainless Y-pipe
  • No need for factory heat shields
  • Runs cooler to protect expensive plug wires

Emissions Compliant: D-161-45

US Patent #6,634,171 B1

Details

  • 48841
  • 48841
  • 801279488410
  • Banks Power
  • New

Shipping Information

  • Item Requires Shipping
  • 69.0 lbs.
  • W24.0000” x H11.0000” x L43.5000”